Nissan Juke Engine ReplacementReconditioned & Used Prices Compared

Rebuilt Nissan Juke engines typically cost £850-£3,200 supply-only, depending on engine code and variant. MR16DDT turbo units sit at the higher end due to complexity, while K9K diesel and HR16DE petrol are more affordable.

• MR16DDT 1.6 turbo rebuilt: £1,200-£3,200 supply-only
• K9K 1.5 dCi diesel rebuilt: £850-£2,100 supply-only
• Supply & fit labour adds £400-£800 depending on location
• All rebuilt engines include 12-month unlimited mileage warranty

The H5FT 1.2 DIG-T is prone to timing chain stretch causing cold-start rattling, and turbo oil feed pipe blockages leading to turbo failure if not addressed proactively.

• Timing chain stretch typically appears 40k-75k miles
• Blocked turbo oil feed causes smoke and power loss
• Carbon buildup on intake valves affects performance
• Preventative chain kit replacement costs £850-£1,400 specialist

The MR16DDT offers strong performance but has documented timing chain and rod bearing vulnerabilities; proactive maintenance or upgraded rebuilt units significantly improve long-term reliability.

• Timing chain tensioner wear causes rattle 50k-90k miles
• Rod bearing failure can occur if oil starvation happens
• Upgraded rebuilt units with improved bearings resolve known issues
• Regular oil changes with correct spec critical for longevity

Yes, the MR16DDT engine code is shared between Juke and Qashqai (2010-2019), but ECU mapping, mounts and ancillaries may differ - always verify compatibility via registration before ordering.

• MR16DDT block architecture identical across Nissan models
• ECU software, wiring loom and mounts may require adaptation
• Turbo, exhaust and intake routing can differ by model
• Use our registration check to confirm exact fitment compatibility

Rod bearing failure typically stems from oil starvation due to clogged turbo oil feed lines or timing chain failure causing metal debris in the oil, accelerating bearing wear.

• Blocked turbo oil feed starves bearings of lubrication
• Timing chain failure releases metal particles into oil system
• Low oil levels or incorrect oil spec accelerate wear
• Upgraded rebuilt engines include improved oil pumps and bearings

Replace the timing chain at first sign of cold-start rattling or as preventative maintenance around 60k-80k miles on MR16DDT and H5FT engines to avoid catastrophic valve timing failure.

• Listen for metallic rattling on cold start as early warning
• Preventative replacement recommended 60k-80k miles
• Use upgraded chain kits with revised tensioner design
• Specialist replacement costs £750-£1,400 vs £3k+ for engine failure

Your engine code is stamped on the engine block (visible near the gearbox) and listed on your V5C logbook under "Engine Number" - or enter your registration above for instant identification.

• V5C logbook lists engine number/code under section D.2
• Engine code stamped on block near gearbox housing
• Common codes: MR16DDT, H5FT, K9K, HR16DE, HR10DDT
• Our registration lookup instantly identifies exact engine code

While physically possible, swapping H5FT 1.2 for MR16DDT 1.6 requires ECU, wiring, exhaust and mounting modifications - often more cost-effective to replace with a rebuilt same-code engine.

• Engine mounts, ECU and wiring differ between H5FT and MR16DDT
• Exhaust, intake and turbo routing require custom fabrication
• MOT and insurance implications for engine swaps
• Rebuilt same-code engine offers simpler, warranty-backed solution

All engines supplied through EngineMarket include a minimum 12-month unlimited mileage warranty; some specialists offer extended terms up to 24 months for remanufactured units.

• Minimum 12-month unlimited mileage warranty standard
• Warranty covers parts and labour for manufacturing defects
• Keep service records and use correct oil spec to maintain coverage
• Confirm exact terms with your chosen supplier before ordering

EngineMarket connects you with 100+ vetted UK specialists offering supply-only or supply & fit services nationwide - enter your registration for tailored local quotes within hours.

• Network covers all UK regions with local fitting options
• Specialists vetted for quality, warranty terms and customer reviews
• Compare multiple quotes side-by-side before committing
• Nationwide delivery available for supply-only orders