Range Rover Velar D275 Engine ReplacementCompare Prices & Get Quotes
Get quotes today from trusted UK Range Rover Velar D275 engine specialists. Compare prices on reconditioned, rebuilt and used 306DT V6 diesel engines to find the best supply and fit solution for your vehicle.
Supply & Fit Available
12-Month Warranty
Nationwide Delivery
100+ Suppliers
From £7,500 to £11,000 [EM-QUOTE]
Used from £3,500 · Reconditioned from £6,500 · Common codes: 306DT
From £3,500
Tested, bare/short engine
From £6,500
Rod bearings addressed, tested
From quote
Upgraded bearings, full teardown, revised valvetrain
Secure enquiry - no spam, no pressure. Genuine quotes only from vetted UK Range Rover Velar D275 specialists.
3 Simple Steps3 Simple Stepsto Finding the Best Range Rover Velar D275 Replacement Engineto Finding the Best Range Rover Velar D275 Replacement Engine
Most replacements completed within 3-5 days.
Variant HistoryRange Rover Velar D275 - Engine History & Specs at a Glance
When the D275 variant launched in the L560 Range Rover Velar, it introduced a refined 3.0-litre V6 diesel engine, bridging the gap between the four-cylinder D240 and the high-performance D300, offering exceptional torque and motorway refinement.
Variant HistoryRange Rover Velar D275 - Engine History & Specs at a Glance
When the D275 variant launched in the L560 Range Rover Velar, it introduced a refined 3.0-litre V6 diesel engine, bridging the gap between the four-cylinder D240 and the high-performance D300, offering exceptional torque and motorway refinement.
Range Rover Velar D275
Fuel TypeDiesel
Engine Size Range3.0L
Power Output Range275hpEngine History Timeline
306DT (3.0L V6 Diesel) 275hp, introduced to the Velar lineup, featuring twin-turbocharging and an 8-speed ZF automatic transmission.
Minor software and emissions calibration updates to the 306DT to refine DPF regeneration cycles and improve overall drivability across the L560 lifecycle.
Key Specs Snapshot
Fuel TypeDieselEngine Size Range3.0LPower Output Range275hpYears Produced2018-2024Every engine fitted to the Range Rover Velar D275 is covered below, with UK rebuilt pricing and known failure points.
Range Rover Velar D275 Engine Codes - Specifications & Replacement CostRange Rover Velar D275 Engine Codes - Specifications & Replacement Cost
3.0L Diesel (2018-2024)
Power Output275hpYears Fitted2018-2024
Compatible Trim Levels
- Range Rover Velar D275
- Range Rover Velar D275 R-Dynamic
- Range Rover Velar D275 R-Dynamic HSE
- Range Rover Velar D275 S
Find your exact engine code, specs and UK replacement cost guide.
Used
Tested, ready-to-fit engine
£3,500-£5,500 [EM-QUOTE]
Reconditioned
Addressed known issues, tested
£6,500-£9,500 [EM-QUOTE]
Rebuilt
Full teardown, upgraded internals
£7,500-£11,000 [EM-QUOTE]
Common Failure
Crankshaft bearing failure (tin-aluminium coating fatigue) and oil pump issues are commonly reported, typically emerging between 80,000-140,000 miles, often leading to sudden engine seizure if oil starvation occurs.
The Range Rover Velar D275 (306DT) delivers formidable capability and refinement, but its 3.0L V6 diesel architecture has a well-documented, catastrophic weakness. The 306DT engine dominates replacement demand due to crankshaft bearing failure. Rebuilt engines through EnginesMarket include upgraded internal components designed to address the original failure point, plus a minimum 12-month unlimited mileage warranty.
The Range Rover Velar D275 306DT Silent Killer
Affected Vehicles
Range Rover Velar D275 (306DT, 2018-2024)
Typical Failure Mileage
80,000-140,000 miles
Root Cause
A narrow bearing design with tin-aluminium coating fatigue, combined with oil starvation or extended service intervals, leads to bearing spin followed by crankshaft fracture. Once snapped, the engine seizes instantly and no rebuild is viable.
Why It Happens
A narrow bearing design with tin-aluminium coating fatigue, combined with oil starvation or extended service intervals, leads to bearing spin followed by crankshaft fracture. Once snapped, the engine seizes instantly and no rebuild is viable.
Dealer (parts + labour)
N/A
Specialist (parts + labour)
N/A
What it involves
There is no preventative fix once bearing wear begins; oil analysis is the only early detection method.
Suitability
Not applicable for active failure.
1 - 2 daysDealer (parts + labour)
£9,000-£13,000
Specialist (parts + labour)
£7,500-£11,000 [EM-QUOTE]
What it involves
Supply of hot-tested reconditioned long engine with upgraded crankshaft and heavy-duty bearings, plus 15-20 hours labour.
Suitability
The only viable option. Upgraded components address the original design flaw.
1 - 2 daysAll prices are indicative UK market ranges based on current UK specialist supplier data.| Repair Tier | Dealer (Parts + Labour) | Specialist (Parts + Labour) | What It Involves | Suitability | Estimated Time |
|---|---|---|---|---|---|
 Minor/Preventative Minor | N/A | N/A | There is no preventative fix once bearing wear begins; oil analysis is the only early detection method. | Not applicable for active failure. | 1 - 2 days |
 Full Replacement - rebuilt/reconditioned engine Best Value | £9,000-£13,000 | £7,500-£11,000 [EM-QUOTE] | Supply of hot-tested reconditioned long engine with upgraded crankshaft and heavy-duty bearings, plus 15-20 hours labour. | The only viable option. Upgraded components address the original design flaw. | 1 - 2 days |
Our Recommendation
Our Recommendation
There is no preventative fix for a snapped crankshaft - when it fails, replacement is the only option. We strongly recommend a reconditioned engine with an upgraded crankshaft and heavy-duty bearings over a used unit. The additional investment buys a 12-month unlimited warranty and assurance that the known design flaw has been permanently addressed.
Don't Let Engine Failure Write Off Your Range Rover Velar D275
Across the 306DT range, the crankshaft weakness is a known quantity. The good news is that specialist reconditioned engines with upgraded components are available at 40-60% below dealer pricing, each carrying a 12-month unlimited mileage warranty. EnginesMarket connects you with trusted UK Range Rover Velar D275 specialists who supply and fit nationwide. Get quotes today, compare transparent prices, and get back on the road without the main dealer premium.
12-Month Minimum
UK Specialists Vetted
Best Price GuidanceImportant Information
Important Information
All prices are indicative UK market ranges based on historical quote data and repair requests from our network of engine specialists. Dealer pricing is estimated based on published main dealer labour rates and genuine OEM parts pricing. Specialist pricing reflects actual quote data from EnginesMarket's UK network. Actual costs vary depending on damage severity, vehicle condition, variant, and workshop location within the UK. Use our free comparison tool to get tailored quotes for your specific Range Rover Velar D275. Every engine supplied through EnginesMarket carries a minimum 12-month unlimited mileage warranty - always confirm exact terms with your chosen supplier.
Range Rover Velar D275 Engine ReplacementFrequently Asked Questions
Question 1How much does a Range Rover Velar D275 engine replacement cost-
A reconditioned Range Rover Velar D275 (306DT) engine typically costs between £6,500 and £9,500 for supply only, with fully rebuilt options ranging from £7,500 to £11,000.
- Prices vary based on the specialist and whether you choose supply-only or supply-and-fit.
- Used engines are cheaper (£3,500-£5,500) but carry a high risk as the original crankshaft weakness remains.
Question 2What are the signs of crankshaft failure in a Range Rover Velar D275-
The most common early warning sign is a distinct knocking or rumbling noise from the bottom end of the engine, particularly under load or during cold starts.
- You may also notice a sudden drop in oil pressure or the illumination of the engine management light.
- In severe cases, the crankshaft snaps without warning, causing the engine to seize instantly.
Question 3Is it worth replacing the engine in a Range Rover Velar D275-
Yes, if the body and chassis are sound. A £7,500-£11,000 reconditioned engine with upgraded components adds significant reliability and delivers 80,000-120,000 more miles.
- Range Rover Velar D275 models (£25,000+) easily justify the replacement cost.
- Replacement cost is a small fraction of the vehicle's overall market value.
Question 4How long does a Range Rover Velar D275 engine replacement take from start to finish-
A professional supply and fit service typically takes 3 to 7 days total.
- A pre-built reconditioned engine takes 1-2 days to fit (15-20 hours of labour).
- If your engine is being rebuilt, add 5-10 days for strip-down, machining, and assembly before fitting.
Question 5Can the crankshaft failure in the Range Rover Velar D275 be prevented-
There is no guaranteed preventative fix for the factory crankshaft design flaw.
- The best mitigation is strict adherence to 5,000-mile oil change intervals using the correct OEM-spec oil.
- Regular oil analysis from 80,000 miles can detect metal shavings before catastrophic failure occurs.
Why Choose UsCompare Range Rover Velar D275Engine PricesToday
980+ Range Rover 306DT engines supplied through our network [EM-VERIFIED]
12-Month Warranty on every rebuilt Range Rover Velar D275 engine
Nationwide UK delivery
specialist supply & fit available for the L560 D275
Comparing quotes is completely free and carries no obligation. By entering your registration, you ensure that the quotes you receive are specifically tailored to your exact Range Rover Velar D275 and its 306DT engine code, connecting you directly with vetted UK specialists who understand this specific V6 diesel architecture.
Enter your registration
and get matched with verified Range Rover Velar D275 specialists.