Nissan Tsuru Engine ReplacementCompare Prices & Save

Typical rebuilt GA16DE/GA16DNE engines cost £800-£1,800 supply-only, with supply & fit adding £300-£800 depending on location and garage rates. Used units start around £500 but require careful verification.

• GA16DE rebuilt: £800-£1,800 supply-only typical range
• GA16DNE late-model: £900-£2,000 due to emissions calibration complexity
• Supply & fit service adds £300-£800 to engine price
• Used engines cheaper but request compression test before purchase

GA16DE and GA16DNE are the most common, with GA15B on early models and SR18DE/SR20DE on performance imports. Verify your exact code via DVLA lookup or engine bay stamping.

• GA16DE: 1993-2008, most widely available replacement option
• GA16DNE: 2009-2017, updated emissions calibration
• GA15B: 1993-1998 early models, carburetted or basic EFI
• SR18DE/SR20DE: performance variants, enthusiast builds

Yes, GA16DE/GA16DNE engines from UK-market Sentra B13/B14 are mechanically compatible, but verify ECU calibration, cooling configuration and ancillary bracket alignment for your specific Tsuru variant.

• Platform sharing means core block/head compatibility is strong
• Mexico-spec Tsuru may have different ECU maps or cooling hoses
• Check ancillary brackets, exhaust manifold and wiring harness match
• Specialist import garages can advise on minor adaptation needs

Head gasket degradation from thermal cycling, timing chain tensioner wear causing rattle, and valve stem seal deterioration leading to oil consumption are the three most documented failure patterns on UK import Tsuru.

• Head gasket failure typically occurs 80k-120k miles
• Timing chain rattle on cold start indicates tensioner/guide wear
• Blue smoke on acceleration suggests valve seal or ring wear
• Regular cooling system maintenance reduces head gasket risk

A professionally reconditioned GA16DE/GA16DNE with upgraded components and proper break-in can reliably deliver 40,000-60,000+ miles, with many UK import owners reporting longer service when maintenance schedules are followed.

• Quality of machining and component selection drives longevity
• Upgraded MLS gasket and tensioner reduce repeat failure risk
• Follow break-in procedure: varied RPM, avoid hard load first 500 miles
• Regular oil changes with correct specification extend service life

Yes, EngineMarket connects you with UK specialists offering supply & fit service for Nissan Tsuru engines, with nationwide garage network coverage and single-point warranty on parts and labour where agreed.

• Supply & fit adds £300-£800 to engine price typically
• Network includes garages experienced with import Nissan platforms
• Single warranty covers both engine and installation where arranged
• Ideal for non-mechanic owners or urgent replacement needs

Every engine supplied through EngineMarket includes a minimum 12-month unlimited mileage warranty from UK specialists, with optional extended coverage available; always confirm exact terms with your chosen supplier before order.

• 12-month unlimited mileage is standard network minimum
• Warranty covers manufacturing defects and workmanship
• Labour coverage requires supply & fit arrangement with participating garage
• Keep service records to maintain warranty validity

Locate the engine code stamp on the block near the cylinder head mating surface, or use your VIN with a Nissan dealer or DVLA lookup; GA16DE/GA16DNE are most common on UK-import Tsuru.

• Engine code stamped on block, often near thermostat housing
• VIN decoding via Nissan dealer or specialist import registry
• DVLA registration lookup confirms variant and engine family
• Photograph stamp and share with supplier for verification

SR18DE or SR20DE swaps are feasible for enthusiast builds but require ECU, wiring harness, exhaust and cooling system adaptations; consult a specialist import garage for feasibility and MoT compliance guidance.

• SR engines share block architecture but need ancillary modifications
• ECU and immobiliser pairing requires specialist calibration
• MoT emissions testing may require original-specification documentation
• Budget £1,200-£3,500 for performance engine plus adaptation costs

Enter your registration above for instant DVLA-verified identification, then compare multiple quotes from vetted UK Nissan Tsuru specialists within hours - no obligation, no spam, genuine quotes only.

• Registration lookup ensures correct engine code and variant match
• Compare supply-only vs supply & fit pricing side-by-side
• Filter by warranty length, location and supplier rating
• Secure enquiry process protects your contact details