Land Rover Defender 130 P300 Engine ReplacementCompare Prices & Get Quotes
Get quotes today from trusted UK Land Rover Defender 130 P300 engine specialists. Compare prices on reconditioned, rebuilt and used engines to find the perfect match for your high-performance long-wheelbase Defender.
Supply & Fit Available
12-Month Warranty
Nationwide Delivery
100+ Suppliers
From £4,200 to £6,500 [EM-QUOTE]
Used from £1,500 · Reconditioned from £3,000 · Common codes: 204PT
From £1,500
Tested, bare/short engine
From £3,000
Rod bearings addressed, tested
From quote
Upgraded bearings, full teardown, revised valvetrain
Secure enquiry - no spam, no pressure. Genuine quotes only from vetted UK Land Rover Defender 130 P300 specialists.
3 Simple Steps3 Simple Stepsto Finding the Best Land Rover Defender 130 P300 Replacement Engineto Finding the Best Land Rover Defender 130 P300 Replacement Engine
Most replacements completed within 3-5 days.
Variant HistoryLand Rover Defender 130 P300 - Engine History & Specs at a Glance
When the P300 variant was introduced to the Defender 130 lineup, it brought a highly refined 2.0-litre turbocharged Ingenium petrol engine, offering a compelling blend of responsive performance and improved fuel efficiency for the long-wheelbase chassis.
Variant HistoryLand Rover Defender 130 P300 - Engine History & Specs at a Glance
When the P300 variant was introduced to the Defender 130 lineup, it brought a highly refined 2.0-litre turbocharged Ingenium petrol engine, offering a compelling blend of responsive performance and improved fuel efficiency for the long-wheelbase chassis.
Land Rover Defender 130 P300
Fuel TypePetrol
Engine Size Range2.0L (1997cc)
Power Output Range300 PS (296 bhp / 221 kW) across the variant's historyEngine History Timeline
204PT (Ingenium 2.0L Petrol) 2.0L, 300 PS (296 bhp) (Introduction of the P300 petrol variant to the L663 Defender 130 range, featuring a twin-scroll turbocharger for enhanced low-end torque)
Key Specs Snapshot
Fuel TypePetrolEngine Size Range2.0L (1997cc)Power Output Range300 PS (296 bhp / 221 kW) across the variant's historyYears Produced2022-presentEvery engine fitted to the Land Rover Defender 130 P300 is covered below, with UK rebuilt pricing and known failure points.
Land Rover Defender 130 P300 Engine Codes - Specifications & Replacement CostLand Rover Defender 130 P300 Engine Codes - Specifications & Replacement Cost
2.0L Petrol (2022-present)
Power Output300 PS (296 bhp)Years Fitted2022-present
Compatible Trim Levels
- Defender 130 P300 S
- Defender 130 P300 SE
- Defender 130 P300 HSE
- Defender 130 P300 X-Dynamic SE
- Defender 130 P300 X-Dynamic HSE
Find your exact engine code, specs and UK replacement cost guide.
Used
Tested, ready-to-fit engine
£1,500-£2,800
Reconditioned
Addressed known issues, tested
£3,000-£5,000
Rebuilt
Full teardown, upgraded internals
£4,200-£6,500
Common Failure
Cooling system issues, water pump failure, and occasional timing chain stretch, which are documented patterns within the broader 204PT Ingenium family.
The Land Rover Defender 130 P300 is celebrated for its accessible performance and refined power delivery. The 204PT 2.0L Ingenium petrol engine is the core unit driving replacement demand for this variant. Rebuilt engines supplied through EnginesMarket include upgraded components, such as revised water pumps and timing chain kits, addressing the original failure points, plus a minimum 12-month unlimited-mileage warranty.
Why the Land Rover Defender 130 P300 204PT Requires Attention
Affected Vehicles
Land Rover Defender 130 P300 (204PT, 2022-present)
Typical Failure Mileage
60,000-120,000 miles
Root Cause
Plastic water pump impellers or housing cracks can lead to coolant loss and subsequent overheating, a risk exacerbated by the thermal demands of the twin-scroll turbocharger.
Why It Happens
Plastic water pump impellers or housing cracks can lead to coolant loss and subsequent overheating, a risk exacerbated by the thermal demands of the twin-scroll turbocharger.
Dealer (parts + labour)
£600-£1,000
Specialist (parts + labour)
£400-£800
What it involves
Replace water pump, flush system, and inspect thermal management seals.
Suitability
Highly recommended as preventative maintenance to avoid catastrophic overheating.
1 - 2 daysDealer (parts + labour)
£6,000-£8,500
Specialist (parts + labour)
£4,200-£6,500
What it involves
Supply & fit, upgraded components addressing the original failure point, 12-month warranty.
Suitability
The right call if there is severe overheating damage, warped heads, or you want long-term reliability.
1 - 2 days
All prices are indicative UK market ranges based on current UK specialist supplier data.| Repair Tier | Dealer (Parts + Labour) | Specialist (Parts + Labour) | What It Involves | Suitability | Estimated Time |
|---|---|---|---|---|---|
 Preventative Cooling System Service Minor | £600-£1,000 | £400-£800 | Replace water pump, flush system, and inspect thermal management seals. | Highly recommended as preventative maintenance to avoid catastrophic overheating. | 1 - 2 days |
 Full Replacement - rebuilt/reconditioned engine Best Value | £6,000-£8,500 | £4,200-£6,500 | Supply & fit, upgraded components addressing the original failure point, 12-month warranty. | The right call if there is severe overheating damage, warped heads, or you want long-term reliability. | 1 - 2 days |
Our Recommendation
Our Recommendation
If your Defender 130 P300 is exhibiting early signs of coolant loss or minor timing chain rattle, a preventative specialist service is a cost-effective solution. However, if the engine has suffered severe overheating or internal damage, a full reconditioned replacement is the most reliable long-term investment.
Don't Let Engine Failure Write Off Your Land Rover Defender 130 P300
Preserving a modern long-wheelbase Defender requires the right parts and expertise. By comparing quotes through EnginesMarket, you avoid main dealer premiums while securing a rebuilt or reconditioned 204PT engine fitted with upgraded components and backed by a minimum 12-month unlimited-mileage warranty. Our nationwide network ensures your iconic 4x4 is handled by specialists who understand modern Land Rover engineering.
12-Month Minimum
UK Specialists Vetted
Best Price GuidanceImportant Information
Important Information
"All prices are indicative UK market ranges based on historical quote data and repair requests from our network of engine specialists. Dealer pricing is estimated based on published main dealer labour rates and genuine OEM parts pricing. Specialist pricing reflects actual quote data from EnginesMarket's UK network. Actual costs vary depending on damage severity, vehicle condition, variant, and workshop location within the UK. Use our free comparison tool to get tailored quotes for your specific Land Rover Defender 130 P300. Every engine supplied through EnginesMarket carries a minimum 12-month unlimited mileage warranty - always confirm exact terms with your chosen supplier."
Land Rover Defender 130 P300 Engine ReplacementFrequently Asked Questions
Question 1How much does a Land Rover Defender 130 P300 engine replacement cost-
A full reconditioned or rebuilt Land Rover Defender 130 P300 engine typically costs between £3,000 and £6,500 for the unit itself, depending on the level of rebuild.
- Used units can be found from £1,500, but carry higher risk for a modern turbocharged petrol.
- Supply and fit labour will add approximately £650-£910 depending on the specialist.
Question 2What are the signs of cooling system failure in a Land Rover Defender 130 P300-
Early detection is critical to preventing catastrophic damage to your 204PT engine.
- Look for unexplained coolant loss, overheating warnings on the dashboard, or a sweet smell from the engine bay.
- The turbocharger relies heavily on proper cooling, making early intervention essential.
Question 3Is it worth replacing the engine in a Land Rover Defender 130 P300-
Yes, absolutely, given the high retained values of the L663 Defender 130 range.
- A rebuilt 204PT engine with upgraded water pumps and timing components can extend the vehicle's life significantly.
- For vehicles valued over £55,000, a warranted reconditioned engine protects your investment far better than a cheap used unit.
Question 4What is the difference between the P300 and P400 Defender 130 engines-
The P300 uses a 2.0-litre four-cylinder turbocharged Ingenium petrol engine producing 300 PS.
- The P400 uses a larger 3.0-litre inline-six mild-hybrid petrol engine producing 400 PS.
- Both are highly capable, but the P300 offers a more efficient, lighter front-end setup.
Question 5How long does a Land Rover Defender 130 P300 engine replacement take-
A straightforward supply and fit of a reconditioned 204PT engine typically takes 2 to 4 days at a specialist workshop.
- This allows time for proper bedding-in procedures, ECU calibration, fluid checks, and a thorough road test.
Why Choose UsCompare Land Rover Defender 130 P300Engine PricesToday
100+ P300 Defender engines supplied through our network
12-Month Warranty on every rebuilt Land Rover Defender 130 P300 engine
Nationwide UK delivery
supply & fit available for premium 4x4s
Don't leave your modern long-wheelbase Defender's reliability to chance. Comparing quotes through EnginesMarket is 100% free and no-obligation, connecting you directly with vetted UK specialists who understand the unique engineering of the Land Rover Defender 130 P300. Get the right engine, at the right price, with the warranty you deserve.
Enter your registration
and get matched with verified Land Rover Defender 130 P300 specialists.