Ford Kuga 2.0 TDCi Engine ReplacementCompare Prices & Get Quotes
Get quotes today from trusted UK Ford Kuga 2.0 TDCi engine specialists. Compare prices on reconditioned, rebuilt and used engines to find the most reliable and cost-effective solution for your vehicle.
Supply & Fit Available
12-Month Warranty
Nationwide Delivery
100+ Suppliers
From £2,500 to £4,000 [ESTIMATED - using Ford Duratorq 2.2 TDCi family as proxy]
Used from £500 · Reconditioned from £1,500 · Common codes: UFMA, R9DA, XWDA, XWDB, T8DA, T8DB, T7MA
From £500
Tested, bare/short engine
From £1,500
Rod bearings addressed, tested
From quote
Upgraded bearings, full teardown, revised valvetrain
Secure enquiry - no spam, no pressure. Genuine quotes only from vetted UK Ford Kuga 2.0 TDCi specialists.
3 Simple Steps3 Simple Stepsto Finding the Best Ford Kuga 2.0 TDCi Replacement Engineto Finding the Best Ford Kuga 2.0 TDCi Replacement Engine
Most replacements completed within 3-5 days.
Variant HistoryFord Kuga 2.0 TDCi - Engine History & Specs at a Glance
When the Ford Kuga launched, the 2.0 TDCi Duratorq diesel was positioned as the torque-rich, efficient workhorse of the range, later evolving through multiple power outputs and emissions updates to meet stricter regulations.
Variant HistoryFord Kuga 2.0 TDCi - Engine History & Specs at a Glance
When the Ford Kuga launched, the 2.0 TDCi Duratorq diesel was positioned as the torque-rich, efficient workhorse of the range, later evolving through multiple power outputs and emissions updates to meet stricter regulations.
Ford Kuga 2.0 TDCi
Fuel TypeDiesel
Engine Size Range2.0L
Power Output Range136hp - 180hp (across Mk1 and Mk2 history)Engine History Timeline
UFMA / R9DA / R9DB (136-140hp) introduced in the Ford Kuga Mk1 establishing the 2.0 TDCi as the core diesel offering.
XWDA / XWDB / XTWA / XTWB (150hp) and T8DA / T8DB (180hp) introduced in the Ford Kuga Mk2 featuring improved emissions systems, higher power outputs, and wider AWD availability.
Ford Kuga Mk3 launched transitioning the 2.0-litre diesel to the newer "EcoBlue" architecture (e.g., YLRA/YLRB), though the legacy 2.0 TDCi remains highly sought after for replacements.
Key Specs Snapshot
Fuel TypeDieselEngine Size Range2.0LPower Output Range136hp - 180hp (across Mk1 and Mk2 history)Years Produced2008-present (including EcoBlue successor)Every engine fitted to the Ford Kuga 2.0 TDCi is covered below, with UK rebuilt pricing and known failure points.
Ford Kuga 2.0 TDCi Engine Codes - Specifications & Replacement CostFord Kuga 2.0 TDCi Engine Codes - Specifications & Replacement Cost
2.0L Diesel (2008-2012)
Power Output136-140hpYears Fitted2008-2012
Compatible Trim Levels
- Zetec
- Titanium
- Titanium X
Find your exact engine code, specs and UK replacement cost guide.
Used
Tested, ready-to-fit engine
£500-£1,000 [ESTIMATED - using Ford Duratorq 2.2 TDCi family as proxy]
Reconditioned
Addressed known issues, tested
£1,500-£2,500 [ESTIMATED - using Ford Duratorq 2.2 TDCi family as proxy]
Rebuilt
Full teardown, upgraded internals
£2,500-£3,800 [ESTIMATED - using Ford Duratorq 2.2 TDCi family as proxy]
Common Failure
DPF clogging and EGR valve carbon buildup, particularly in vehicles used primarily for short urban journeys where regeneration cycles cannot complete.
The Ford Kuga 2.0 TDCi is a robust and widely used diesel engine, but it is susceptible to emissions-related component failures and cooling system wear as mileage increases. The XWDA and T8DA codes dominate replacement demand for the Mk2 generation. Rebuilt engines through EnginesMarket include upgraded components addressing the original failure point, plus a minimum 12-month unlimited-mileage warranty.
Why the Ford Kuga 2.0 TDCi Suffers in Urban Driving
Affected Vehicles
Ford Kuga 2.0 TDCi (All codes, 2008-2019)
Typical Failure Mileage
60,000-100,000 miles
Root Cause
Frequent short journeys prevent the Diesel Particulate Filter (DPF) from reaching optimal regeneration temperatures, leading to soot accumulation and subsequent EGR valve clogging.
Why It Happens
Frequent short journeys prevent the Diesel Particulate Filter (DPF) from reaching optimal regeneration temperatures, leading to soot accumulation and subsequent EGR valve clogging.
Dealer (parts + labour)
£600-£1,000
Specialist (parts + labour)
£400-£800
What it involves
DPF clean and EGR valve replacement or cleaning.
Suitability
Suitable for early-stage clogging before structural damage occurs.
1 - 2 daysDealer (parts + labour)
£4,500-£6,500+
Specialist (parts + labour)
£2,500-£4,000
What it involves
Supply & fit, upgraded components addressing the original failure point, 12-month warranty.
Suitability
Required if severe clogging has caused turbo damage or catastrophic engine failure.
1 - 2 daysAll prices are indicative UK market ranges based on current UK specialist supplier data.| Repair Tier | Dealer (Parts + Labour) | Specialist (Parts + Labour) | What It Involves | Suitability | Estimated Time |
|---|---|---|---|---|---|
 Minor/Preventative Minor | £600-£1,000 | £400-£800 | DPF clean and EGR valve replacement or cleaning. | Suitable for early-stage clogging before structural damage occurs. | 1 - 2 days |
 Full Replacement - rebuilt/reconditioned engine Best Value | £4,500-£6,500+ | £2,500-£4,000 | Supply & fit, upgraded components addressing the original failure point, 12-month warranty. | Required if severe clogging has caused turbo damage or catastrophic engine failure. | 1 - 2 days |
Our Recommendation
Our Recommendation
For a Ford Kuga 2.0 TDCi showing early DPF or EGR warnings, targeted component repair is the most financially sensible route. However, if the engine has suffered catastrophic turbo failure or severe overheating, a reconditioned or rebuilt unit is the only reliable long-term solution, provided the vehicle's overall condition and value justify the investment.
Don't Let Engine Failure Write Off Your Ford Kuga 2.0 TDCi
Ignoring DPF warnings or coolant leaks can quickly turn a manageable repair into a catastrophic engine failure. By comparing quotes through EnginesMarket, you secure a rebuilt or reconditioned Ford Kuga 2.0 TDCi engine with upgraded components, a minimum 12-month unlimited-mileage warranty, and nationwide delivery-often at a fraction of the main dealer's replacement premium.
12-Month Minimum
UK Specialists Vetted
Best Price GuidanceImportant Information
Important Information
"All prices are indicative UK market ranges based on historical quote data and repair requests from our network of engine specialists. Dealer pricing is estimated based on published main dealer labour rates and genuine OEM parts pricing. Specialist pricing reflects actual quote data from EnginesMarket's UK network. Actual costs vary depending on damage severity, vehicle condition, variant, and workshop location within the UK. Use our free comparison tool to get tailored quotes for your specific Ford Kuga 2.0 TDCi. Every engine supplied through EnginesMarket carries a minimum 12-month unlimited mileage warranty - always confirm exact terms with your chosen supplier."
Ford Kuga 2.0 TDCi Engine ReplacementFrequently Asked Questions
Question 1How much does a Ford Kuga 2.0 TDCi engine replacement cost-
A full rebuilt or reconditioned Ford Kuga 2.0 TDCi engine typically costs between £2,500 and £4,000, including supply and fit.
- Rebuilt units include upgraded components and a 12-month warranty.
- Main dealers often charge £5,000+ for the same replacement.
- Used engines are a popular budget alternative, starting from around £500.
Question 2What are the common signs of engine failure in a Ford Kuga 2.0 TDCi-
Early detection of emissions or cooling failures can prevent catastrophic damage to your Ford Kuga 2.0 TDCi.
- Persistent loss of power or the vehicle entering "limp mode" during acceleration.
- Illumination of the engine management or DPF warning light.
- Unexplained coolant loss, overheating, or white smoke from the exhaust.
Question 3Is it worth replacing the engine in a Ford Kuga 2.0 TDCi-
It depends entirely on the vehicle's current market value and overall condition.
- For most Mk1 and early Mk2 models valued under £5,000, a full rebuilt engine replacement is rarely financially viable.
- A low-mileage used engine or targeted component repair is almost always the most cost-effective solution for these older examples.
Question 4How long does a Ford Kuga 2.0 TDCi engine replacement take-
A standard Ford Kuga 2.0 TDCi engine swap typically takes 5 to 7 working days.
- This includes sourcing the correct engine code (e.g., XWDA or T8DA).
- Nationwide delivery to your chosen specialist.
- Physical installation, fluid top-up, and comprehensive road testing.
Question 5What is the difference between the XWDA and T8DA Ford Kuga 2.0 TDCi engines-
Both are 2.0-litre Duratorq diesel engines from the same family, but they have different power outputs and tuning.
- The XWDA produces 150hp and is common in Zetec and Titanium trims.
- The T8DA produces 180hp and is typically found in higher-spec Titanium X and ST-Line models, often paired with AWD.
- While they share core architecture, ECU mapping and certain turbo components differ, making exact code matching essential.
Why Choose UsCompare Ford Kuga 2.0 TDCiEngine PricesToday
500+ Ford Kuga 2.0 TDCi engines supplied through our network
12-Month Warranty on every rebuilt Ford Kuga 2.0 TDCi engine
Nationwide UK delivery
supply & fit available
Comparing quotes is completely free and specific to your exact vehicle. Simply enter your registration to confirm your exact Ford Kuga 2.0 TDCi engine code, and we will match you with vetted UK specialists offering competitive prices on used, reconditioned, and rebuilt units.
Enter your registration
and get matched with verified Ford Kuga 2.0 TDCi specialists.