Fiat Brava Engine ReplacementCompare Prices & Save

Replacing a Fiat Brava engine typically costs £650-£3,000 depending on condition and engine type. Used units start around £650, rebuilt petrol engines average £1,500-£2,200, and performance 2.0 HGT rebuilt units reach £2,000-£3,000.

• Used engines: £650-£1,400 supply only, variable mileage and warranty
• Rebuilt 1.6 16v petrol: £1,500-£2,200 typical UK market range
• Rebuilt 1.9 JTD diesel: £1,800-£2,600 including upgraded injection components
• Supply & fit adds £400-£800 to engine price depending on garage location

Replacing a Fiat Brava engine is worthwhile if the bodywork is sound and the car has sentimental or practical value. Compare the £1,500-£2,600 rebuilt engine cost against buying another used Brava.

• Brava values typically £500-£2,000; engine replacement may exceed car value
• Rebuilt engines with 12-month warranty offer better long-term reliability than unknown used units
• Consider total ownership cost: tax, insurance, MOT versus replacement vehicle purchase
• If bodywork is rust-free and interior good, engine replacement can extend life cost-effectively

Yes, Fiat Bravo and Brava engines are fully interchangeable as both share the 182 platform and identical engine mounting points across 1995-2001 production.

• Bravo and Brava share chassis code 182 and all engine fitments
• Engine codes 188A2000, 182B2000 etc. are identical across both models
• ECU and wiring loom compatibility confirmed for same-year variants
• Always verify engine code matches your Brava's original specification

Classic Brava head gasket failure signs include mayonnaise-like sludge under the oil cap, white exhaust smoke, coolant loss without visible leaks, and persistent overheating.

• Milky residue under oil filler cap indicates coolant-oil mixing
• White, sweet-smelling exhaust smoke suggests coolant entering combustion chambers
• Coolant level drops without external leaks points to internal gasket breach
• Overheating despite full coolant and working thermostat confirms gasket failure

All Fiat Brava petrol engines use timing belts except the 1.6 16v which has a chain; diesel 1.9 TD/JTD units use belts. Belt-driven engines require replacement every 60k miles or 5 years.

• 1.4 12v, 1.8 16v, 2.0 20v petrol: timing belt, replace every 60k miles/5 years
• 1.6 16v petrol: timing chain, but tensioner wear can cause rattle and jump
• 1.9 TD/JTD diesel: timing belt, critical to replace on schedule to avoid interference damage
• Always replace water pump and tensioner when changing belt on Brava engines

Technically yes, but swapping a 2.0 HGT engine into a 1.6 Brava requires extensive modifications including gearbox, wiring loom, ECU and driveshaft changes from a donor HGT.

• Engine mounts are similar but not identical; custom brackets often needed
• HGT uses different gearbox ratios and clutch assembly than 1.6 models
• Wiring loom and ECU must be swapped or extensively reprogrammed for compatibility
• MOT emissions testing may fail if ECU doesn't match chassis number records

A typical Fiat Brava engine swap takes 6-10 hours labour at a specialist garage. Allow 2-4 days total for engine delivery, fitting, fluid changes and post-installation testing.

• Supply-only engines require you to arrange fitting; allow 1-2 days garage lead time
• Supply & fit packages include delivery and installation in one coordinated service
• Post-fit road test and ECU adaptation may add half a day to completion time
• Delays possible if ancillary parts (hoses, mounts) need replacement during fit

Yes, every rebuilt or reconditioned Fiat Brava engine supplied through EngineMarket includes a minimum 12-month unlimited mileage warranty covering parts and labour at any UK garage.

• Warranty valid nationwide; claim at any VAT-registered garage in the UK
• Covers manufacturing defects and premature failure of replaced components
• Does not cover damage from incorrect installation, misuse or lack of servicing
• Keep all service records and use correct oil specs to maintain warranty validity

Use 5W-40 fully synthetic ACEA C3 specification oil for Fiat Brava 1.9 JTD engines to protect the turbo and DPF; older non-JTD 1.9 TD units can use 10W-40 semi-synthetic.

• JTD 105 engines require low-ash C3 oil to protect emissions equipment
• Change oil every 10k miles or 12 months whichever comes first on Brava diesels
• Always replace oil filter with genuine or high-quality equivalent at each service
• Incorrect oil specification can void engine warranty and damage turbocharger

The Fiat Brava engine code is stamped on the cylinder block near the gearbox mounting flange, visible from underneath the car with a torch; also listed on the VIN plate and service book.

• Look for alphanumeric code like 188A2000 or 182B2000 on engine block casting
• VIN plate under bonnet or driver's door pillar shows engine specification
• Service book and MOT certificates often record engine code for reference
• Enter your registration on our site to auto-identify the correct engine code