BMW 2 Series 220d Engine Replacement Compare Prices & Get Quotes

A BMW 2 Series 220d engine replacement typically costs between £1,700 and £3,500 depending on the condition (used, reconditioned, or rebuilt) and the specific engine code. Used engines start from around £1,100, reconditioned units from £1,700, and fully rebuilt engines with a 12-month warranty from £2,400. Labour for supply and fit adds approximately £800-£1,500 depending on the workshop. Main dealer replacement costs can exceed £4,200.

• Used: £1,100-£1,850
• Reconditioned: £1,700-£2,600
• Rebuilt: £2,400-£3,500

The most common early warning sign is a rattling noise from the engine on cold start, which typically lasts 2-5 seconds before disappearing as oil pressure builds. This affects both N47-powered (2014-2015) and B47-powered (2015+) 220d models. Other symptoms include a metallic ticking sound, engine hesitation, and in severe cases, the engine management light illuminating with fault codes P000A, P0016, or P0017.

• Rattling on cold start is the primary symptom
• Can develop from 50,000-100,000 miles
• Ignoring it can lead to catastrophic engine failure

It depends on the vehicle's value and the extent of the damage. For an N47-powered 220d (2014-2015) worth £5,000-£8,000, a reconditioned engine at £1,700-£2,400 is often worthwhile if you plan to keep the car. For B47 models (2015+) worth £8,000-£15,000, replacement is almost always justified. For G42 models (2021+) worth £15,000+, replacement is a no-brainer. If the car is worth under £5,000, a used engine or repair may be more cost-effective.

• Vehicle value is the key deciding factor
• Rebuilt engines come with a 12-month warranty for peace of mind
• Compare quotes to find the best value option

A typical BMW 2 Series 220d engine replacement takes 3-5 working days from order to completion, assuming the engine is in stock. Supply-only orders are usually dispatched within 1-2 working days. Supply and fit through our specialist network typically takes 3-5 days, including delivery, fitting, and ECU calibration. N47 timing chain replacement alone requires 12-18 hours of labour due to the rear-mounted chain.

• Supply only: 1-2 days
• Supply and fit: 3-5 working days
• N47 timing chain replacement: 12-18 hours labour

The BMW 220d used the N47 engine from 2014-2015 (184hp, 380Nm torque) and the B47 from 2015 onwards (190hp, 400Nm torque). The B47 was introduced to address the N47's timing chain issues and improve emissions compliance. The B47 is generally more reliable, though it has its own EGR cooler and timing chain tensioner problems. Both are 2.0-litre four-cylinder turbo diesels.

• N47: 184hp, 2014-2015, timing chain issues
• B47: 190hp, 2015-present, EGR cooler and tensioner issues
• B47 improved timing chain reliability but introduced EGR cooler failures

Yes - all engines supplied through EnginesMarket are MoT emissions compliant. Rebuilt and reconditioned engines are tested to ensure they meet the original emissions standards for the vehicle's year. For diesel 220d models, this includes DPF and EGR system validation to ensure compliance with UK emissions regulations.

• All engines meet OEM emissions standards
• Rebuilt units include upgraded EGR and DPF components
• MoT readiness is confirmed before supply