Audi Q2 30 TFSI / 1.0 TFSI Engine ReplacementCompare Prices & Get Quotes
Get quotes today from trusted UK Audi Q2 30 TFSI / 1.0 TFSI engine specialists. Compare prices on reconditioned, rebuilt and used engines to find the most cost-effective, reliable solution for your vehicle.
Supply & Fit Available
12-Month Warranty
Nationwide Delivery
100+ Suppliers
From £2,000 to £3,500
Used from £500 · Reconditioned from £1,200 · Common codes: CHZJ, DKRF
From £500
Tested, bare/short engine
From £1,200
Rod bearings addressed, tested
From quote
Upgraded bearings, full teardown, revised valvetrain
Secure enquiry - no spam, no pressure. Genuine quotes only from vetted UK Audi Q2 30 TFSI / 1.0 TFSI specialists.
3 Simple Steps3 Simple Stepsto Finding the Best Audi Q2 30 TFSI / 1.0 TFSI Replacement Engineto Finding the Best Audi Q2 30 TFSI / 1.0 TFSI Replacement Engine
Most replacements completed within 3-5 days.
Variant HistoryAudi Q2 30 TFSI / 1.0 TFSI - Engine History & Specs at a Glance
When the 1.0 TFSI (later badged as 30 TFSI) was introduced to the Q2 range, it offered a highly efficient, turbocharged three-cylinder alternative to the larger 1.4 TFSI, delivering strong urban economy without sacrificing typical Audi refinement.
Variant HistoryAudi Q2 30 TFSI / 1.0 TFSI - Engine History & Specs at a Glance
When the 1.0 TFSI (later badged as 30 TFSI) was introduced to the Q2 range, it offered a highly efficient, turbocharged three-cylinder alternative to the larger 1.4 TFSI, delivering strong urban economy without sacrificing typical Audi refinement.
Audi Q2 30 TFSI / 1.0 TFSI
Fuel TypePetrol
Engine Size Range1.0L (999cc)
Power Output Range116hpEngine History Timeline
CHZJ (1.0L TFSI 116hp) introduced for the Q2 launch, featuring lightweight EA211 architecture for optimal fuel efficiency.
DKRF (1.0L TFSI 116hp) introduced alongside the "30 TFSI" naming convention update, featuring refined engine management and improved emissions compliance for the facelifted model.
Key Specs Snapshot
Fuel TypePetrolEngine Size Range1.0L (999cc)Power Output Range116hpYears Produced2016-presentEvery engine fitted to the Audi Q2 30 TFSI / 1.0 TFSI is covered below, with UK rebuilt pricing and known failure points.
Audi Q2 30 TFSI / 1.0 TFSI Engine Codes - Specifications & Replacement CostAudi Q2 30 TFSI / 1.0 TFSI Engine Codes - Specifications & Replacement Cost
1.0L Petrol (2016-2018)
Power Output116hpYears Fitted2016-2018
Compatible Trim Levels
- 1.0 TFSI SE
- 1.0 TFSI Sport
- 1.0 TFSI S line
Find your exact engine code, specs and UK replacement cost guide.
Used
Tested, ready-to-fit engine
£500-£1,000
Reconditioned
Addressed known issues, tested
£1,200-£2,200
Rebuilt
Full teardown, upgraded internals
£2,000-£3,500
Common Failure
Water pump leaks and occasional carbon buildup on intake valves, typical of the EA211 architecture.
The Audi Q2 30 TFSI / 1.0 TFSI’s EA211 three-cylinder architecture is generally robust and efficient, but high-mileage examples can develop cooling system leaks or minor carbon buildup. Rebuilt engines supplied through EnginesMarket include upgraded components addressing these original failure points, backed by a minimum 12-month unlimited-mileage warranty.
Why the Audi Q2 30 TFSI / 1.0 TFSI Loses Coolant
Affected Vehicles
Audi Q2 30 TFSI / 1.0 TFSI (CHZJ, DKRF, 2016-present)
Typical Failure Mileage
60,000-100,000 miles
Root Cause
Plastic components in the water pump and thermostat housing can degrade under thermal stress, leading to coolant loss and potential overheating if ignored.
Why It Happens
Plastic components in the water pump and thermostat housing can degrade under thermal stress, leading to coolant loss and potential overheating if ignored.
Dealer (parts + labour)
£400-£800
Specialist (parts + labour)
£250-£500
What it involves
Replacement of water pump and thermostat housing assembly
Suitability
Highly effective if caught early before overheating occurs.
1 - 2 daysDealer (parts + labour)
£3,500-£5,500
Specialist (parts + labour)
£2,000-£3,500
What it involves
Supply & fit, upgraded components addressing the original failure point, 12-month warranty
Suitability
Necessary if coolant loss has led to warped cylinder heads or seized components.
1 - 2 daysAll prices are indicative UK market ranges based on current UK specialist supplier data.| Repair Tier | Dealer (Parts + Labour) | Specialist (Parts + Labour) | What It Involves | Suitability | Estimated Time |
|---|---|---|---|---|---|
 Minor/Preventative Minor | £400-£800 | £250-£500 | Replacement of water pump and thermostat housing assembly | Highly effective if caught early before overheating occurs. | 1 - 2 days |
 Full Replacement - rebuilt/reconditioned engine Best Value | £3,500-£5,500 | £2,000-£3,500 | Supply & fit, upgraded components addressing the original failure point, 12-month warranty | Necessary if coolant loss has led to warped cylinder heads or seized components. | 1 - 2 days |
Vehicle Value Check
Vehicle Value Check
A typical 2016-2023 Audi Q2 30 TFSI / 1.0 TFSI is valued between £8,000 and £18,000 [THIRD-PARTY]. A £2,000-£3,500 rebuilt engine replacement represents a safe investment ( Safe), comfortably preserving the vehicle's premium residual value without approaching the scrap threshold.
Our Recommendation
Our Recommendation
Address coolant warnings immediately. If the engine block is undamaged, a specialist cooling system repair is cost-effective. However, if overheating has caused internal damage, a full rebuilt engine is the only safe long-term solution.
Don't Let Engine Failure Write Off Your Audi Q2 30 TFSI / 1.0 TFSI
Navigating premium compact SUV repairs can be complex, but you do not have to accept main dealer premiums. By comparing quotes through EnginesMarket, you gain access to vetted UK specialists who provide rebuilt Audi Q2 30 TFSI / 1.0 TFSI engines with upgraded components, comprehensive 12-month unlimited-mileage warranties, and nationwide supply & fit options.
Compare rebuilt CHZJ Audi Q2 30 TFSI / 1.0 TFSI engine prices
12-Month Minimum
UK Specialists Vetted
Best Price GuidanceImportant Information
Important Information
All prices are indicative UK market ranges based on historical quote data and repair requests from our network of engine specialists. Dealer pricing is estimated based on published main dealer labour rates and genuine OEM parts pricing. Specialist pricing reflects actual quote data from EnginesMarket's UK network. Actual costs vary depending on damage severity, vehicle condition, variant, and workshop location within the UK. Use our free comparison tool to get tailored quotes for your specific Audi Q2 30 TFSI / 1.0 TFSI. Every engine supplied through EnginesMarket carries a minimum 12-month unlimited mileage warranty - always confirm exact terms with your chosen supplier.
Audi Q2 30 TFSI / 1.0 TFSI Engine ReplacementFrequently Asked Questions
Question 1How much does an Audi Q2 30 TFSI / 1.0 TFSI engine replacement cost-
The cost varies based on the engine's condition, but for the 1.0 TFSI CHZJ/DKRF codes, prices typically range from £500 for a used unit to £1,200-£2,200 for a reconditioned engine, with fully rebuilt units ranging from £2,000 to £3,500.
- Supply and fit labour typically adds £390-£520 depending on the specialist.
- Rebuilt units include comprehensive 12-month warranties.
Question 2What are the signs of water pump failure in an Audi Q2 30 TFSI / 1.0 TFSI-
Cooling system vulnerabilities are a known trait of the EA211 architecture, though rarely catastrophic if monitored.
- Sweet-smelling coolant odour or visible puddles under the vehicle.
- Dashboard warnings for low coolant levels or engine overheating.
- Whining noises from the front of the engine bay indicating bearing wear in the pump.
Question 3Is it worth replacing the engine in an Audi Q2 30 TFSI / 1.0 TFSI-
Yes, for most owners, due to the vehicle's strong retained value and the high cost of equivalent new models.
- A 2016-2023 Q2 30 TFSI is typically valued between £8,000 and £18,000.
- A £2,000-£3,500 rebuilt engine represents a safe investment that preserves the car's premium status and urban practicality.
Question 4How long does an Audi Q2 30 TFSI / 1.0 TFSI engine replacement take-
A professional supply and fit service is highly efficient, typically completing the entire process within 2 to 4 working days to minimise your downtime.
- The physical removal and installation takes 6 to 8 hours of specialist labour.
- The process includes ECU adaptation and comprehensive road testing.
Question 5What is the difference between the CHZJ and DKRF engine codes in the Audi Q2 30 TFSI / 1.0 TFSI-
They represent sequential calibrations of the same 1.0L EA211 turbocharged petrol architecture.
- CHZJ was the initial 116hp code introduced with the Q2 launch in 2016.
- DKRF is the updated 116hp code introduced around 2018, aligning with the "30 TFSI" badge and featuring refined engine management for improved emissions compliance.
Why Choose UsCompare Audi Q2 30 TFSI / 1.0 TFSIEngine PricesToday
Hundreds of Audi Q2 30 TFSI / 1.0 TFSI engines supplied through our network
12-Month Warranty on every rebuilt Audi Q2 30 TFSI / 1.0 TFSI engine
Nationwide UK delivery
supply & fit available
Do not overpay for your Audi Q2 30 TFSI / 1.0 TFSI engine replacement. Our free, no-obligation comparison tool connects you directly with vetted UK specialists. Whether you need a budget-friendly used unit or a fully rebuilt engine with a comprehensive warranty, we ensure you get the best price for your exact CHZJ or DKRF engine code, without the main dealer markup.
Enter your registration
and get matched with verified Audi Q2 30 TFSI / 1.0 TFSI specialists.